750/4 Forks & Triple Trees...

'To the point' advice on what fits what, parts interchangeability and simple solutions to common problems...
This forum applies to Hondas.
Keep your post brief. You may include 2-3 clear cropped photos (max 600 pixels wide)...
Post Reply
Prof
Founder, Choppers Australia
Posts: 5749
Joined: Sat Oct 22, 2005 3:54 pm
Location: Willunga, South Australia
Contact:

750/4 Forks & Triple Trees...

Post by Prof » Thu May 11, 2006 10:01 pm

CB750/4 Triple Trees ...
CB450 trees are what you are after. They are a straight swap over but have separate risers.

Longer forks...

80's XL & XR honda's provide tubes that give you 5-7" over(depending on model) for K2-6 models when assebled properly with replacement spacers.

K1 & K0 front ends require some extra machining. Dead easy. Anyone buying 4-7" overs for Jap front ends from Forked by Frank needs their head read as there are cheaper ways to do it without affecting strength. Too easy.

This info provided by Choppaweeza... Thanks mate...
Chopit'nrideit... Prof

Post Reply

Return to “Fits'n Bits; Honda...”