Oil Tank

Chat about choppers here. Any posts considered by forum administrators to be used by businesses as unpaid advertising will be promptly removed...

Moderator: Prof

Post Reply
steve
Posts: 66
Joined: Fri May 05, 2006 2:25 pm
Location: Ipswich

Oil Tank

Post by steve » Sun Apr 18, 2010 7:43 pm

Hello me again with unusual question number 27

What is the opinion when designing an oil tank for how much air space is required? I would prefer the answer as a volume not distance as I would presume different tanks shapes would give different distance.

Reidy

Prof
Founder, Choppers Australia
Posts: 5964
Joined: Sat Oct 22, 2005 3:54 pm
Location: Willunga, South Australia
Contact:

Post by Prof » Mon Apr 19, 2010 12:57 am

I try to leave about 10-15%.

If there is no breather back into the motor, you need to add a breather (say 5mm) out of the top of the tank or cap with a hose to rear. If you have no breather hot oil will tend to push out past the filler cap and create a right old mess.
Chopit'nrideit... Prof

Post Reply

Return to “Chopper Chat (includes how to post photos)”