DANGER - DON'T WIRE Up Your Bike Like This Linked version!!

[WaterBottle]

Members,

http://cycles.evanfell.com/wp-content/u ... n_Fell.png

Be WARNED the circuit diagram is WRONG in that the Brake Light is wired via the light switch meaning during the day, if you choose to have lights off, then there is NO brake light either!

I sent him a corrected version 0n 11May202 but the web version remains incorrect at this time!

ElectroBOT

----- Original Message -----
From: "Hans Amstel"
To: <evan@evanfell.com>
Sent: Tuesday, May 11, 2010 8:02 PM
Subject: Errata in Custom_Motorcycle_Wiring_Diagram_by_Evan_Fell.png (PNG Image, 947Ã-480 pixels)


> Hello Evan,
>
> Refer to this diagram link also as attached image and corrected version
>
> http://cycles.evanfell.com/wp-content/u ... n_Fell.png
>
> There is an error in your wiring diagram in that the brake light no longer
> works if you kill the light switch so it really should go like this
>
> Ignition switch to 10 amp fuse which then goes brake light switch AND lights
> on / off switch.
>
> See my corrections
>
> Cheers,
> Hans-Robert
> Electrical and Electronic Engineering Lecturer Adelaide University.

[drewseventyone]

Very wrong indeed, it should be positive ground, the way Mr Lucas intended....and it seems to have some sort of starter and solenoid arrangement that has no place on a motorcycle ...just kidding

Drew

[Thespis]

Ah yes, the joys of the www ..... goes well with all the other wrong stuff ya come across, everyday, on this old net of ours

Don't believe everything you see and Let the Surfer Beware!!!!